Solar and backup power for CCTV

By WiFi Store editorial team · Published 27 September 2026 · Updated 19 October 2026 · Technically reviewed by Onose Paul, Project Manager, on 19 October 2026

Add up the power of every camera, the recorder and (for remote viewing) the router and switch. Multiply by the hours of backup you need, then allow extra for battery depth of discharge and inverter losses. This gives an estimate only: actual runtime depends on equipment, battery condition and sunlight, so a site survey confirms the final design.

Typical CCTV power draw (estimates — check each datasheet)
DeviceTypical drawNotes
Ubiquiti G5 Bullet (manufacturer figure)4 W maximumPowered by PoE; verified on Ubiquiti's spec page, 19 Oct 2026
Other IP cameras (estimate)4–10 W eachUse the maximum figure on that model's datasheet; more with infrared on at night
NVR with 1 hard drive (estimate)15–40 WPlus the PoE load of attached cameras; check the recorder datasheet
Router (estimate)8–15 WCheck the adapter rating; needed only for remote viewing
PoE switch (estimate)5–15 W plus camera loadIf cameras are not powered by the NVR

How do I calculate backup size?

Use each device's own datasheet figure where we have one — for example four Ubiquiti G5 Bullets draw at most 4 × 4 W = 16 W. Rows marked estimate are typical ranges, not device-specific figures.

Worked example with estimates: 4 cameras × 6 W + 25 W NVR + 10 W router ≈ 59 W. For 8 hours, that is about 470 Wh before losses. Allow for usable battery capacity (often around 80–90% for lithium) and inverter losses, so plan for meaningfully more than the raw figure.

UPS, inverter or solar?

A UPS covers short outages. For long outages, an inverter with a lithium battery is more practical. Adding solar panels recharges the battery during the day, but output varies with weather and shading.

Why is a site survey needed?

Panel placement, cable runs, existing loads and real equipment draw all change the design. We never guarantee runtime without one.

Recommended equipment

Current price and availability are shown on each product page.

Customer questions

Can you guarantee runtime?
No — only estimate it. A site survey confirms actual performance.
Is solar alone enough?
Not at night. Solar needs a battery to keep cameras recording after dark.
Should the router be on backup too?
Only if you want remote viewing during outages. Recording continues locally without it as long as the cameras and recorder have power.

Sources and review

Technical details checked by Onose Paul (Project Manager) on 19 October 2026.

Request a power survey

Chat on WhatsApp

Uploads: attach photos, drawings or documents in the WhatsApp chat that opens.