Choosing an inverter or power station for Starlink
By WiFi Store editorial team · Published 27 September 2026 · Updated 19 October 2026 · Technically reviewed by Onose Paul, Project Manager, on 19 October 2026
Starlink's own specification sheets give an average draw of 75–100 W for the Standard kit and 25–40 W for the Mini. Add any extra router or mesh nodes, then multiply by the hours you need. For short outages, a portable power station is plug-and-play. For daily or off-grid use, an inverter with a lithium battery and solar panels is usually better value. Runtime is always an estimate until confirmed on site.
| Portable power station | Inverter + battery (+ solar) | |
|---|---|---|
| Best for | Short outages, portable use | Daily outages, off-grid sites |
| Setup | Plug in | Installation needed |
| Expandability | Limited | Add batteries and panels |
| Also powers | Small loads only | Router, lights, fans, more |
How much power does Starlink use?
Starlink Standard (V4 with Router 3): average 75–100 W, per Starlink's specification sheet; the power supply is rated 100–240 V, 2.5 A. Starlink Mini: average 25–40 W; it accepts 12–48 V DC at 60 W input, or USB-C PD of at least 100 W (20 V/5 A) with Starlink's USB-C cable accessory. Figures verified 19 October 2026.
Real draw varies with weather, obstructions and use, so plan on the top of the range.
How long will a 268 Wh power station run Starlink?
Assume about 85% of the rated capacity is usable after conversion losses: 268 Wh × 0.85 ≈ 228 Wh. Standard kit at 75–100 W: roughly 2.3–3 hours. Mini at 25–40 W: roughly 5.7–9 hours. These are estimates, not guarantees.
How do I estimate backup hours?
Divide usable battery watt-hours by your total watts, then reduce for inverter losses. Use the WiFi Store solar calculator for a quick estimate.
Can I avoid inverter losses?
Some kits can run from DC with a suitable converter, which can be more efficient. Use only adapters rated for your kit and installed correctly.
Recommended equipment
Current price and availability are shown on each product page.
- EcoFlow RIVER 2 Pro Portable Power Station (768 Wh)Portable power station for outages
- BLUETTI EB3A Portable Power Station (268 Wh)Smaller power station for Starlink Mini
- MUST PV1800 VPM 3 kW 24V Hybrid InverterHybrid inverter for solar-backed setups
- Starlink Mini Standard WiFi Kit – MiniLower-power Starlink kit
Customer questions
- How many hours will it run?
- Use the calculator for an estimate; actual runtime depends on battery, sunlight, kit and usage.
- Is a modified sine wave inverter OK?
- Pure sine wave inverters are the safer choice for networking equipment.
- Will a power station run Starlink Mini longer?
- Yes. Starlink lists the Mini at an average 25–40 W versus 75–100 W for the Standard kit, so the same battery typically lasts about two to three times longer. Divide usable capacity by total load for your estimate.
Sources and review
Technical details checked by Onose Paul (Project Manager) on 19 October 2026.